Overview
ABSTRACT
This article shows how to select and use relevant standards that fit a system and a business model so as to fully satisfy stakeholders’ needs. The article begins with definitions, and goes on to explain the relevance of the standards and the context of their use. It presents the activities and organisation of the standardisation process, and a few rules to select efficient standards and to verify that the standards are correctly implemented and managed throughout the system lifecycle.
Read this article from a comprehensive knowledge base, updated and supplemented with articles reviewed by scientific committees.
Read the articleAUTHOR
-
Jean-René RUAULT : LAMIH UMR CNRS 8201 - University of Valenciennes and Hainaut-Cambrésis, Valenciennes, France
INTRODUCTION
The aim of this article is to show, step-by-step, how to develop and implement the relevant standards to ensure that a system operates correctly and seamlessly throughout its life cycle, and gives full satisfaction to all stakeholders, from users to maintainers, from managers to supervisors.
The article begins by defining and differentiating between the key concepts of norms, standards and regulations. It characterizes the main types of standards.
The article goes on to show the relevance of standards, both from an economic point of view and in terms of the potentially long life of systems. In this respect, it presents the impact of standards in the telecommunications field on the development of the mobile telephony market, which has gone from a niche market in the 1980s to a mass market today.
Next, the article presents three ways of driving standards production: by technologies, by capabilities, and by both capabilities and technologies. The latter is more detailed, showing that research and technology (R&T) processes and activities must be synchronized with overall system project management, in particular to prepare for upgrades, renovations and evolutions throughout the lifecycle. This approach is based on technology maturity levels: in fact, R&T activities must be carried out so as to be able to replace obsolete technologies with mature ones during the renovations that punctuate the life of a system. Removing obsolete technologies and integrating mature ones affects both the functional and organic architecture of the system. Impacts must be assessed and anticipated as far upstream as possible, so that the system can be sized accordingly. Anticipation enables us to define the necessary reserves to take account of contingencies. While new technologies must, at the very least, be isofunctional in relation to the original technologies, they often offer new possibilities not initially envisaged, which enrich the system's capabilities, but which can also generate new risks.
The article presents the activities involved in selecting the right domain standards for a system, assessing their usefulness and relevance, and maintaining the standards repository throughout the life of the system.
The article continues with an overview of standardization organizations in the field of systems engineering, at international, European and national level, and a summary presentation of a few standards in the field of systems engineering, including the open systems standard, which is relevant to the issues discussed in this article.
Exclusive to subscribers. 97% yet to be discovered!
Already subscribed? Log in!
KEYWORDS
standardization | Systems engineering | interoperability | Standard | System | interchangeability | capability | technology readiness level
Standards and standardization - Relevance and stakes
Bibliography
Also in our database
Standards and norms
- Design guidance for integrated modular avionics - ARINC 651 - 1997
- Recommandation pour une spécification de management de projet - EN 9200 - 2005
- Maintenance – Guidelines for preparing maintenance contracts - EN 13269 - 2006
- Obsolescence management – Application guide - EN 62402 - 2008
- Disaster and emergency management – Shared situation awareness – Part 1: Message structure - CWA...
Regulations
Decree no. 2006-576 of May 22, 2006 on emergency medicine
Decree no. 2006-577 of May 22, 2006 on technical operating conditions applicable to emergency medical facilities
Decree no. 2008-1401 of December 19, 2008 on accreditation and conformity assessment
Decree no. 2009-697 of June 16, 2009 on standardization
DHOS/01 circular no. 2007-65 of February 13, 2007 on emergency care
Directory
Organizations – Federations – Associations (non-exhaustive list)
[AFIS] Association française d'ingénierie système (AFIS): www.afis.fr
[AFNOR] Association française de normalisation (AFNOR) : http://www.afnor.org
[BNAE] Bureau de normalisation aéronautique et espace (BNAE) : ...
Exclusive to subscribers. 97% yet to be discovered!
Already subscribed? Log in!
Article included in this offer
"Control and systems engineering"
(
149 articles
)
Updated and enriched with articles validated by our scientific committees
A set of exclusive tools to complement the resources