Overview
ABSTRACT
This article presents case studies of adhesion between building materials. The method used consists of peel tests (a flexible reinforcing membrane is inserted into the layer to be peeled) and characterization of the fracture surfaces by spectroscopy and microscopy. Two distinct interfaces (aggregate/bitumen and concrete/paint coating) are characterized to assess the potential for the application of this method and to study the adhesion mechanisms.
Read this article from a comprehensive knowledge base, updated and supplemented with articles reviewed by scientific committees.
Read the articleAUTHOR
-
Matthieu HORGNIES : Doctor of Materials Science - Research Manager - Lafarge Research Center, Saint Quentin-Fallavier, France
INTRODUCTION
The study of adhesion between construction materials is a vast subject with many implications. Understanding adhesion mechanisms and improving adhesion are essential to increase the service life of roads, but also to maintain the aesthetics of painted concrete facades. This article sets out to illustrate the use of a peeling methodology, including a flexible reinforcing membrane, combined with analysis of the surface chemical composition of fracture surfaces. This precise quantification of adhesion and correlation of peel forces with fracture surface analysis is already used to study adhesion of other types of materials (usually polymer-based), but is relatively little applied in the field of construction materials. The case studies presented in this article concern adhesion between two particular interfaces of construction materials (aggregate/bitumen and concrete/protective paint). Indeed, several similar parameters influence adhesion between these two pairs of materials: the roughness, porosity and composition (mineralogy) of the substrates (aggregate or concrete), but also the wettability and rheology of organic materials, etc.
Exclusive to subscribers. 97% yet to be discovered!
Already subscribed? Log in!
KEYWORDS
adhesion | peeling test | fracture surfaces
Case Studies on the Adhesion between Building Materials
Bibliography
- (1) - GORKEM (C.), SENGOZ (B.) - Predicting stripping and moisture induced damage of asphalt concrete prepared with polymer modified bitumen and hydrated lime - . Construction and Building Materials, 23, 2227-2236 (2009).
- (2) - JAHROMI (S.G.) - Estimation of resistance to moisture destruction in asphalt mixtures - ....
Also in our database
Standards and norms
- Bitumen and bituminous binders – Specifications for road bitumens NF EN 12591 AFNOR - AFNOR - 2009
- Bitumen and bituminous binders – Determination of needle penetrability NF EN 1426 AFNOR - AFNOR - 2007
- Adhesives – Peel test for a flexible-on-rigid bonded assembly – Part 1: 90° peeling NF EN 28510-1 AFNOR - AFNOR - 2014
Directory
Laboratories – Design offices – Schools – Research centers (non-exhaustive list)
Coating Research Institute (CoRI) http://www.cori-coatings.be/
Imperial College London, Department of Mechanical Engineering http://www3.imperial.ac.uk/mechanicalengineering
...Exclusive to subscribers. 97% yet to be discovered!
Already subscribed? Log in!
Article included in this offer
"Friction, wear and lubrication"
(
97 articles
)
Updated and enriched with articles validated by our scientific committees
A set of exclusive tools to complement the resources