Overview
ABSTRACT
Liquid metals (Pb, Na, Hg, Al, Zn) and their alloys are used in a large number of industrial sectors: energy, aeronautics, metallurgy. Due to their thermal properties, their use is very interesting as coolants of nuclear systems for instance. However, these liquid metals are corrosive when they come into contact with solid materials, all the more so as their temperature of use is high. Preserving structural materials in contact with these liquid metals requires the knowledge, understanding and modeling of the potential corrosion phenomena.
Read this article from a comprehensive knowledge base, updated and supplemented with articles reviewed by scientific committees.
Read the articleAUTHORS
-
Fanny BALBAUD : Doctor, HdR - Engineer from the École nationale supérieure de chimie de Clermont-Ferrand - CEA international expert in materials and corrosion, CEA Saclay
-
Laure MARTINELLI : Doctorate, engineer from the École nationale supérieure des mines de Paris - Research engineer at the Laboratory for the Study of Non-Aqueous Corrosion, CEA Saclay
INTRODUCTION
Liquid metals are used in many industrial sectors: metallurgy,
energy, aeronautics. They are mainly used as heat transfer fluids
in heat exchanger components (Na, Pb, Pb-Bi, Pb-Li, Ga, Hg) due to
their high thermal conductivity, which gives them exceptional heat
transfer properties (the heat transfer capability of the fluid will
determine the diameters of pipes and piping elements, It is a function
of the fluid's thermal mass capacity, while the heat transfer capacity
determines the heat exchanger's exchange surfaces, and is a function
of the fluid's thermal conductivity
Liquid metals can be corrosive to the solid materials they come
into contact with, especially at higher operating temperatures. The
materials used are either metallic (mainly iron-based) or refractory.
The need to guarantee the service life of structures containing these
liquid metals, and to anticipate any component changes that may need
to be made, requires an understanding and modeling of corrosion mechanisms.
This is all the more essential in the case of the nuclear industry,
which uses or plans to use liquid metals as: heat transfer fluids
in Generation IV nuclear reactors (Na, Pb)
Exclusive to subscribers. 97% yet to be discovered!
Already subscribed? Log in!
KEYWORDS
state of art | Scanning electron microscope | Oxygen probe | energy | metallurgy | thermodynamic | High temperature corrosion
CAN BE ALSO FOUND IN:
Corrosion phenomena in liquid metal systems
Bibliography
Also in our database
Websites
Handbook on Lead-bismuth Eutectic Alloy and Lead Properties, Materials Compatibility,Thermal-hydraulics and Technologies http://www.oecd-nea.org/science/reports/2007/nea6195-handbook.html (page consulted on November 10, 2012).
Events
Congress:
Heavy Liquid Metal Coolant (HLMC) is held irregularly in Obninsk, Russia (or as a workshop in other countries). This conference focuses on all aspects of liquid metal technology, not just corrosion.
International Conference on Corrosion and Protection of Materials for High Temperatures (HTPCM). This conference is held every four years on the Ile des Embiez (France). It focuses on high-temperature corrosion and brings...
Directory
Organizations – Federations – Associations (non-exhaustive list)
French Anticorrosion Center http://www.cefracor.org/
European Federation of Corrosion http://www.efcweb.org/
Laboratories – Design offices – Schools – Research centers (non-exhaustive list)
Laboratoire d'Étude...
Exclusive to subscribers. 97% yet to be discovered!
Already subscribed? Log in!
Article included in this offer
"Nuclear engineering"
(
178 articles
)
Updated and enriched with articles validated by our scientific committees
A set of exclusive tools to complement the resources