Aircraft Icing - In-flight Measurements for Certification:The Value of Imaging Probes

Add to my library

TRP4004 V1 Article

Aircraft Icing - In-flight Measurements for Certification:The Value of Imaging Probes

Authors : Guy FEBVRE , Pierre COUDTRIS , Serge STEPHAN

Publication date: October 10, 2026 | Lire en français

Add to my library Add to my library

Logo Techniques de l'Ingenieur You do not have access to this resource.
Request your free trial access! Free trial

Already subscribed?

Overview

ABSTRACT

To obtain flight certification in icing conditions, aircraft manufacturers must prove the effectiveness of their anti-icing or de-icing systems. Prototypes are equipped with instruments to characterize cloud microphysics. While laser spectrometers typically measure the small droplets responsible for icing, they lack data on large drops or ice crystals. This article discusses how adding imaging instruments fills this gap, presenting their measurement principles and data processing within this specific regulatory framework.

Read this article from a comprehensive knowledge base, updated and supplemented with articles reviewed by scientific committees.

Read the article

AUTHORS

  • Guy FEBVRE : Associate Professor - Laboratory of Physical Meteorology UMR6016 UCA/CNRS, Aubière, France

  • Pierre COUDTRIS : CNRS Research Engineer - Laboratory of Physical Meteorology UMR6016 UCA/CNRS, Aubière, France

  • Serge STEPHAN : Flight Test Analysis Engineer - Airbus Helicopters, Marignane, France

 INTRODUCTION

Febvre (2015) [TRP 4 002] presents the key aspects of the challenge of measuring atmospheric icing conditions in the context of aircraft certification by the EASA (European Aeronautic and Space Agency).

As a reminder, the supercooled state of water (a liquid state at subzero temperatures) is a common phenomenon in our atmosphere and leads to ice accretion on aircraft structures during flight, which can result in accidents. According to EASA regulations, aircraft must be equipped with de-icing or anti-icing systems that are sufficiently effective to ensure flight safety. This requirement can be demonstrated through flight tests in icing conditions, during which cloud conditions are measured to assess their severity.

Recognition of the heterogeneity in the phase of hydrometeors within a single cloud, as well as the existence of large supercooled droplets, necessitates a less restrictive approach to measurement methods; it enables effective discrimination between the liquid and solid states of hydrometeors encountered across a size range extending down to precipitating particles.

It should be noted that at subzero temperatures, the presence of solid hydrometeors – —specifically ice crystals – —is common. With respect to the phase of water, clouds encountered at subzero temperatures can therefore consist entirely of liquid water droplets (supercooled state), ice crystals, or a mixture of the two, with hydrometeor diameters ranging from a few micrometers to a few millimeters. The temperature range in which ice crystals may be present can extend to slightly positive values if one takes into account the inertia of the melting process for crystals originating from colder atmospheric layers.

To classify clouds (liquid water, crystals, or mixed) and address the issue of large droplets and crystals, specific instrumentation— –, an imager – —is particularly relevant in addition to standard instrumentation.

This article reviews: (i) the definition of a cloud from the perspectives of physics and aeronautics; (ii) certification procedures, detailing the requirements; (iii) the instrumentation used. It then details the value of imagers in distinguishing the thermodynamic phase of the water constituting the hydrometeors encountered. A series of examples will be used to illustrate and discuss the relevance of this addition to the measurement chain for icing conditions.

This work follows certification tests conducted under icing conditions for helicopters. The regulations...

You do not have access to this resource.
Logo Techniques de l'Ingenieur

Exclusive to subscribers. 97% yet to be discovered!

You do not have access to this resource. Click here to request your free trial access!

Already subscribed?


KEYWORDS

laser particle size analysis   |   optical array probe   |   liquid water content measurement   |   icing flight certification

Ongoing reading
Aircraft Icing - In-flight Measurements for Certification:The Value of Imaging Probes

Article included in this offer

"Aerospace systems"

( 80 articles )

Complete knowledge base

Updated and enriched with articles validated by our scientific committees

Services

A set of exclusive tools to complement the resources

View offer details
Contact us