5. Non-machined sensors
These sensors are generally manufactured using conventional microelectronics processes, i.e. using planar [4] technology, and often exploit the specific physical properties of conventional components such as diodes or transistors.
They are widely used in industry, and can exploit a multitude of physical effects. These include changes in the resistance of lightly doped silicon (thermistor effect), variations in the current/voltage characteristic of PN junctions, and thermopiles. Thermistors can be produced by diffusing impurities into a substrate and contacting it with aluminum metallizations, or by a doped semiconductor disk metallized on both sides.
The influence of temperature is a function of dopant concentration,...
You do not have access to this resource.
Exclusive to subscribers. 97% yet to be discovered!
Already subscribed?
Log in!
Ongoing reading
Non-machined sensors
Bibliography
-
ZAPPE (S.) - Development an Characterisation of Material System for High Temperature Piezoresistive Pressure Microsensors. - Dusseldorf VDI Verlag (2002).
-
Sensors and Actuators A: Physical - (Special Issues). Volumes: Vol. A83: Transducers '99 314 p (2000).
-
- Vol....
Laboratories and manufacturers
France
CEA - CEN (Commissariat à l'Énergie Atomique) Saclay
CETEHOR (Centre technique de l'Industrie Horlogère)
École Centrale de Lyon
Entran
ESIEE (École Supérieure d'Ingénieurs en Électrotechnique et en Électronique)
Krohne
LAAS (Laboratory of Automation and Systems Analysis)
LETI (Electronics and Information Technology Laboratory)
Métravib RDS
...
You do not have access to this resource.
Exclusive to subscribers. 97% yet to be discovered!
Already subscribed?
Log in!