Automotive transmissions. Contribution to noise and vibration inside vehicles

Add to my library

BM2597 V1 Article

Automotive transmissions. Contribution to noise and vibration inside vehicles

Authors : Elian BARON, Shanjin WANG

Publication date: May 10, 2022 | Lire en français

Add to my library Add to my library

Logo Techniques de l'Ingenieur You do not have access to this resource.
Request your free trial access! Access this article

Already subscribed?

Overview

Noise and vibrations perceived inside a vehicle’s cabin are a major factor in occupant comfort. Reducing them requires accurately identifying their sources, then modelling and measuring the vibroacoustic phenomena involved.
These disturbances may originate from the drivetrain, engine or other sources, with direct, mixed or indirect propagation mechanisms. This analysis makes it possible to determine the most appropriate solutions for each situation.
Several approaches can be used to improve acoustic and vibration comfort, such as the use of a drivetrain damper, which operates on the principle of a vibration absorber to reduce resonances and booming noises. Reducing drivetrain stiffness, adding a flexural mode or adapting damping are other possible solutions. Discover the methods and solutions for controlling vibroacoustic disturbances in vehicles.
Techniques de l’Ingénieur invites you to explore the wealth of its content by accessing this sample article free of charge.

ABSTRACT

The engine noise perceived inside the vehicle passes through various elements, mainly through the engine mounts (high path) and the driveshafts (low path).In general, in vehicles equipped with internal combustion engines, the hooming, rumbling and whirring represent the most important part of the noise and vibration from the engine source.

The reduction of these noises and vibrations can be achieved either by treatment at the source (engine) or by treatment of transfer paths (mounts, driveshafts, body). In the case of driveshafts, the improvement levers consist in optimizing the design of the connecting shafts or installing a vibration absorber on them.

Read this article from a comprehensive knowledge base, updated and supplemented with articles reviewed by scientific committees.

Read the article

AUTHORS

  • Elian BARON : Engineer-Doctor - Powertrain Expert - Renault Automobiles Guyancourt, France

  • Shanjin WANG : Engineer-Doctor - Expert Acoustics Chassis - Renault Automobiles Guyancourt, France

 INTRODUCTION

Vibro-acoustic phenomena associated with lateral transmissions can be classified into three categories, depending on whether the role of the transmission is direct, indirect or both.

  • Direct role: acoustic or vibratory excitation occurs at the level of the transmission itself. This is the case for phenomena linked to the forces generated by constant velocity joints;

  • Mixed role: excitations come from both the transmission and another source, such as the motor. It is the combination of these various excitations that creates an acoustic or vibratory disturbance;

  • Indirect role: the excitation is no longer located in the transmission, but comes from another source. This is the case, for example, with the hum phenomenon, when a natural frequency of the wheel half-shaft amplifies a motor excitation.

Phenomena originating in the transmissions are dealt with in detail in the article [BM 2 596] . In this article, we deal with the "indirect role" category, more precisely, vibro-acoustic phenomena felt in the passenger compartment whose source is the engine and which pass mainly through the suspension buffers (high path) and lateral transmissions (low path).

In vehicles fitted with internal combustion engines, hum, rumble and engine presence generally account for most of the noise and vibration from the engine source.

  • Engine hum: this is a low-frequency noise (20-200 Hz) similar to the sound of a bumblebee in flight. It comes directly from combustion in the cylinders and inertia forces linked to the movement of the moving linkage. Its frequency corresponds to the 2 harmonic of crankshaft rotation in a 4-cylinder engine, and to the 1.5 harmonic of crankshaft rotation in a 3-cylinder engine. In general, hum is the strongest component in terms of vibration level;

  • Engine rumble and presence: these are medium-frequency noises or vibrations (200-800 Hz). More precisely, rumble and presence represent levels in the 250 Hz and 500 Hz octaves respectively, which correspond to levels of motor harmonics higher than those of hum.

...
You do not have access to this resource.
Logo Techniques de l'Ingenieur

Exclusive to subscribers. 97% yet to be discovered!

You do not have access to this resource. Access this article

Already subscribed?


KEYWORDS

booming noise   |   rumbling noise   |   whirring noise   |   transmission vibration absorber   |   acyclism

Ongoing reading
Automotive transmissions. Contribution to noise and vibration inside vehicles

Article included in this offer

"Noise and vibration"

( 87 articles )

Complete knowledge base

Updated and enriched with articles validated by our scientific committees

Services

A set of exclusive tools to complement the resources

View offer details
Contact us