2. Installations
Electrical equipment must be chosen so as to withstand in complete safety the stresses and environmental conditions specific to the place where the equipment is installed and to which it may be subjected.
Every installation should be divided into several circuits as required to facilitate checks, tests and maintenance.
Separate distribution circuits must be provided for those parts of the installation that need to be controlled separately, so that these circuits are not affected by the failure of other circuits.
An electrical installation must have a sufficient number of points of use to meet the normal needs of users.
All circuits must have a protective conductor. These protective conductors must be connected to the installation's main terminals or main earth bars (see standard 542.4)....
Exclusive to subscribers. 97% yet to be discovered!
Already subscribed? Log in!
Installations
Regulations
Article included in this offer
"Finishing work and technical packages"
(
67 articles
)
Updated and enriched with articles validated by our scientific committees
A set of exclusive tools to complement the resources
Standards and norms
- Installations de branchement à basse tension - NF C14-100 - Février 2008
- Low-voltage electrical installations – Compiled version of standard NF C15-100 dated December 2002, its update dated June 2005, its amendments A1 dated August 2008, A2 dated November 2008, A3 dated February 2010, A4 dated May 2013 and A5 dated June 2015, its corrigenda dated October 2010 and November 2012 and interpretation sheets F11, F15,...
Exclusive to subscribers. 97% yet to be discovered!
Already subscribed? Log in!
