1. Types of structure concerned

Figure 1 - Thermal gradient between the 2 faces of the wall

Figure 2 - Plate and shell reinforcement diameters

Figure 3 - Tensioned beam diaphragm

Figure 4 - Minimum wall thickness

Figure 5 - Coating sections

Figure 6 - Reservoir reinforcement

Figure 7 - In-wall or in-slab mounting

Figure 8 - Reinforcement of upper belt and dome

Figure 9 - Dome reinforcement and rebar covering

Figure 10 - Reinforcement between central column and lower dome

Figure 11 - Lower belt reinforcement and foundation

Figure 12 - Reinforcement for in-ground walls

Figure 13 - Reinforcement of recessed and corner walls

Figure 14 - Reinforcement of vertical walls

Figure 15 - Support on concrete, reinforced concrete or masonry wall

Figure 16 - Rectangular tank. Horizontal wiring diagram