Overview
ABSTRACT
Used in many fields (synchronisation, selective filtering, frequency synthesis), the phase-locked loop consists of three main components. The phase comparator delivers a voltage being a function of the instantaneous phase difference between the input signals. The loop filter determines the dynamic characteristics. The voltage-controlled oscillator provides a relationship between the control voltage and the output frequency. This article presents the operating principle and use of the phase-locked loop, including the description of its main components and the analysis of its performance. Applications are presented in digital architectures, including frequency demodulation or data recovery.
Read this article from a comprehensive knowledge base, updated and supplemented with articles reviewed by scientific committees.
Read the articleAUTHORS
-
Corinne BERLAND : Professor, ESIEE Paris - DISC Department, Gustave Eiffel University, Noisy-Champs, France
-
Gaelle LISSORGUES : Professor, ESIEE Paris - ESYCOM Laboratory, Gustave Eiffel University, Noisy-Champs, France
INTRODUCTION
From the very beginning of intercontinental communications, frequency stability posed a challenge. As early as 1930, several articles already described time-consuming and costly methods designed to achieve the most stable frequency possible, and the first direct-synthesis frequency synthesizers appeared around 1943. The advent of semiconductors and electronic circuits subsequently made it possible to reduce the size of equipment, lower its power consumption, and improve its performance. The emergence of digital electronic circuits between 1960 and 1970 brought about a second transformation, with phase-locked loop and digital circuit-based synthesizers becoming predominant, particularly in radio equipment after 1975. The late 1970s saw the development of DDS (Direct Digital Synthesizers), which are fully digital and completely integrable. Frequency synthesizers, which rely on a phase-locked loop, are now mass-produced to meet the needs of modern telecommunications.
This article presents the operating principle of this looped system, which synchronizes an oscillator’s output signal to a reference signal in real time. The analysis of its performance focuses on presenting the essential characteristics, both in dynamic mode (lock and capture ranges, bandwidth, and response time) and in terms of noise. A linear model of the loop is then proposed to derive the performance of the closed-loop system and optimize the selection of its constituent components. The various basic circuits are described, with particular emphasis on the phase comparator, an essential element of this loop. The specific cases of fractional PLLs and subsampling PLLs are presented, before expanding to applications such as frequency synthesis in digital architectures, phase/frequency demodulation, and clock and data recovery.
Exclusive to subscribers. 97% yet to be discovered!
Already subscribed? Log in!
KEYWORDS
phase locked loop | phase comparator | frequency synchronisation
Phase-locked loop: principles, performances and applications
Bibliography
- (1) - PALERMO (S.) - ECEN620 : network theory broadband circuit design fall 2025, lecture 8 : divider circuits. - I- analog & mixed-signal Centre, Texas A&M University (2025).
- (2) - AHMAD (A.A.), ALI (S.H.M.), KAMAL (N), ABDUL RAHMAN (S.R.), OTHMAN (M.) - Design of phase frequency detector (PFD), charge pump (CP) and programmable...
Also in our database
You do not have access to this resource.Exclusive to subscribers. 97% yet to be discovered!
Already subscribed? Log in!
Article included in this offer
"Electronics"
(
300 articles
)
Updated and enriched with articles validated by our scientific committees
A set of exclusive tools to complement the resources