Prevention of buckling

Design of pressurized enclosures

Figure 1 - Determination of limit load (index L) and elastic stress distribution corresponding to this load

Figure 2 - Illustration of the equilibrium condition leading to the formula...

Figure 4 - Example of a chart showing the value of coefficient B as a function of A

Figure 5 - Alternating tensile-torsional test to develop criteria for preventing the risk of progressive deformation

Figure 6 - Example of a global imposed deformation

Figure 7 - Linear behavior domain assuming Tresca criterion and primary loading in x direction and secondary loading in y direction

Figure 8 - Amplitude of variation of secondary bending stresses...

Figure 9 - Illustration of the process for moving from a median fatigue curve based on experimental tests on smooth specimens to a design curve that can be used for equipment design.

Figure 10 - Comparison of RCC-M mechanical and thermal K e values

Figure 11 - Illustration of the two possible approaches to fatigue analysis of geometric singularities

Figure 12 - Difference in the bursting behavior of a container loaded at NDT (Nil Ductility Temperature) and NDT &#43; 66°C.

Figure 13 - Illustration of the superposition principle used in sudden-rupture studies

Figure 15 - Illustration of the crack tip plasticity correction process

Figure 16 - Comparison of transition temperature shifts