Conclusion
Power facilities in the Channel Tunnel

Add to my library

D5055 V2 Article

Conclusion


Power facilities in the Channel Tunnel

Authors : Gilles de KERSABIEC, Jean-Pierre DUPONT, Yves MACHEFERT-TASSIN

Publication date: November 10, 2010 | Lire en français

Add to my library Add to my library

Logo Techniques de l'Ingenieur You do not have access to this resource.
Request your free trial access! Free trial

Already subscribed?

7. Conclusion

Thanks to a well-designed network, updated over the 15 years of operation, redundant power supply circuits and careful equipment maintenance, the current failure rate of the electrical system is very low (failure leading to stoppage or delay of transport missions). These provisions proved particularly effective during the tunnel fire a few years ago, and even more so during the fire of September 11, 2008, when service outside the interval to be repaired (Interval 6) was able to be carried out with a unilateral supply from France, thanks to concentric feeders located safely in the service tunnel.

Similarly, at the end of 2009, during Eurostar incidents, there was no time when the 25 kV supply was interrupted.

The capacity of the system, and in particular the level of power installed on both sides of the Channel, means that Eurotunnel's Energy...

You do not have access to this resource.
Logo Techniques de l'Ingenieur

Exclusive to subscribers. 97% yet to be discovered!

You do not have access to this resource. Click here to request your free trial access!

Already subscribed?


Ongoing reading
Conclusion

Article included in this offer

"Electricity networks and applications"

( 186 articles )

Complete knowledge base

Updated and enriched with articles validated by our scientific committees

Services

A set of exclusive tools to complement the resources

View offer details

Dans les ressources documentaires

Installations électriques HTA - Mise en œuvre et exploitation

Cet article traite de la mise en œuvre des installations électriques à haute tension et plus particulière...

Installations électriques HTA - Réglementation, structure et protections

Cet article traite de la mise en œuvre des installations électriques à haute tension et plus particulière...

Installations électriques BT - Vérifications et entretien

De façon réglementaire, les installations électriques BT doivent faire l’objet de vérifications, lors de ...

Installations électriques BT - Protection contre les contacts directs

La conception et la réalisation des installations électriques industrielles et tertiaires nécessitent la ...

WhitePaper
27 March 2015
Les bonnes pratiques de laboratoire

Les « bonnes pratiques de laboratoire », également appelées BPL, ont pour objectif d\'empêcher un nouveau scandale et sont appliquées au niveau mondial.

Tous les livres blancs
Toutes les actualités
Contact us