6. Oil cut
Oil, which had already been used as an insulator, was employed from the beginning of the century as a breaking medium, as this technique enabled the design of relatively simple and economical devices. Oil circuit breakers were mainly used for voltages from 5 to 150 kV.
6.1 Principle
The contacts are immersed in a dielectric oil. During separation, the arc causes the oil to decompose, releasing hydrogen (approx. 70% by volume), ethylene (approx. 20%), methane (approx. 10%) and free carbon. An arc energy of 100 kJ produces around 10 L of these gases. These gases form a bubble which, due to the inertia of the oil mass, is subjected to a dynamic pressure of up to 50 to 100 bar during cutting.
The hydrogen obtained from the decomposition of...
Exclusive to subscribers. 97% yet to be discovered!
Already subscribed? Log in!
Oil cut
Cutting through the void
Article included in this offer
"Electricity networks and applications"
(
186 articles
)
Updated and enriched with articles validated by our scientific committees
A set of exclusive tools to complement the resources
Bibliography
Exclusive to subscribers. 97% yet to be discovered!
Already subscribed? Log in!
