5. Fences and lightweight construction elements

Figure 1 - Block manufacturing process

Figure 2 - Vibrating press and discharge conveyor

Figure 3 - Floor-standing egg-laying machine

Figure 4 - Block mold

Figure 5 - Diagram of a block manufacturing plant with curing chambers

Figure 6 - Versatile vibrating press equipped with two filling modules for the production of curbs

Figure 7 - Three-sided mold T2

Figure 8 - Paving stone mold with layout corresponding to that of the installation

Figure 9 - Special rammer for two-stage compaction of stepped paving stones

Figure 10 - Paver machine with &#34;wet-on-wet&#34; demolding

Figure 11 - Installation for washing curbs while they are still wet

Figure 12 - Machine for shot blasting paving stones and operating principle

Figure 13 - In-line bush hammer

Figure 14 - Production line with delayed demolding for slabs

Figure 15 - Organization of the various stations on a rotary table slab machine

Figure 16 - Vibrating press for slabs

Figure 17 - High-pressure press for thin slabs

Figure 18 - Mold and ram of a squeezing press

Figure 19 - Immediate washing of tiles

Figure 20 - Flooring obtained with patterned delay paper

Figure 21 - Illustration of the relative position of the mold, tile, die, and roller in a tile machine

Figure 22 - Principle of demolding by turning over on trays

Figure 23 - Cross-section of a fence post mold clamped onto its vibrating beam

Figure 24 - –-molding assembly with mold clamping on a vibrating beam

Figure 25 - Molding assembly with turning and rack storage

Figure 26 - Molding assembly with turning and stackable tray storage

Figure 27 - Turning egg-laying machine

Figure 28 - Centrifugal pipe manufacturing

Figure 29 - Manufacture of pipes by rolling

Figure 30 - Manufacture of pipes by axial compression

Figure 31 - Manufacture of pipes by radial compression with a two-stage roller head

Figure 32 - Different pipe vibration techniques

Figure 33 - Fixed vibrating core machine for large pipes

Figure 34 - Fixed vibrating core machine for manholes

Figure 35 - Mobile vibrating core machine for pipes

Figure 36 - Rotary head for forming the male end

Figure 37 - Machine for producing 2 or 3 pipes simultaneously